|
|
Half-coupling КB-408.81.00.019
|
|
|
|
Half-coupling КB-408.81.00.008
|
|
|
|
Half-coupling КB-408.81.00.001
|
|
|
|
Slide Pin КB-401.02.00.001
|
|
|
|
Tie Bar Eye КB-408.21.08.00.004
Part of a tie bar.
|
|
|
|
Slide Pin KB-408.21.08.00.003
|
|
|
|
Slide Pin КB-408.21.08.00.001
|
|
|
|
Axle КB-408.21.04.40.011
|
|
|
|
Slide Pin KB-403Б.60.40.001
|
|
|
|
Pin KB-408.21.03.01.002 М 48 х 780
A pin fastens a tower section to the portal. The manufacturing period is 15 days.
|
|
|
|
Pin KB-408.21.03.00.003 М 36 х 580
A pin fastens a tower section to a diagonal beam. The manufacturing period is 15 days.
|
|
|
|
Counterweight Pin KB-408.21.02.06.001
|
|
|
|
Chassis arm КB-403А.01.02.000
The chassis arms are provided in a set of four together with the travelling frame KB-403B0.010.00.000. The manufacturing period is 25 days.
|
|
|
|
Cantilever Arm KB-408.21.01.02.000, KB-408.21.01.06.000, KB-408.21.01.07.000, KB-408.21.01.08.000
A cantilever arm is pivotally attached to the base support. It is formed in the shape of a box girder with variable cross-section and connects a ring frame with the travelling undercarriage. A working eyelet and a transport eyelet are welded into the top slab of the cantilever arm on the side that is facing the crane travel axis. Working and transport eyelets are used to fix the cantilever arm relatively to the ring frame.
|
|
|
|
Anchor Bolt KB-401.24.00.000
An anchor bolt (2 pieces) is a 3.5 m long rod with loops and nuts that are threaded on both sides (thread size М48). The bolts hold the tower upright and are inserted through the revolving base plate and each of the two ballast blocks (the left one and the right one) separately, holding them in place.
|
|
